Most likely the Thule roof rack will have the cross bars in the same location as the factory cross bars since the Thule Roof Rack System for your 2012 Honda CR-V utilizes the factory attachment points for installation.
However, there typically are advantages to going with an aftermarket. Usually aftermarket roof racks are much cheaper than a dealer installed rack, as well as being stronger and easier for roof top accessories to attach to.
If you went with the Thule Aero Blade roof rack... view full answer...
I spoke with my contact at Rola about the Rola Sport Series Roof Rack with RB Mounting System, # 59827. He stated that while it is aluminum, it is also black anodized so the system is black like in the first picture. I have included a link to the installation details for this roof rack below.
When using any roof rack, make sure to consult your 2005 BMW X3 owners manual for the weight capacity of the roof. The rack has a capacity of 110 pounds but if the roof can only hold 90 pounds, you... view full answer...
The Rhino-Rack roof rack that fits your 2013 Honda Civic sedan is made in Australia. The correct parts that make up the rack are the following:
- Rhino-Rack Vortex Aero Crossbars # RRVA126B-2
- Rhino-Rack 2500 Series Legs # RRRLKVA
- Custom DK Fit Kit # DK319
You made a really nice choice with Rhino-Rack because it is the best value for a roof rack; Rhino-Rack's quality is equal to similar brands, but at a better price point because you aren't paying extra for a specific brand name... view full answer...
The Thule OutBound Roof Bag, part # Th868 Has the same material on the bottom. While it is made to sit on the roof when needed, I would suggest a clean surface, a fresh coat of wax, and a Non-Skid Roof Protection Pad for Rightline Rooftop Cargo Bags, # RL100650.
The only sure way to prevent the possibility of the roof being scratched would be to use a cargo basket or box. view full answer...
The Yakima PlusNuts replacement part # Y8880039 is the optional hardware kit for Yakima roof rack tracks # Y01126 (42 inch) and # Y01127(54 inch) and are made out of steel.
The roof-rack tracks are an anodized aluminum so you wouldn't have any issues using other types of metals. view full answer...
The Rhino-Rack Rooftop Cargo Bag # RRLB200 is made of a poly canvas tarpaulin which is going to be a flexible material, not a hard rigid surface.
The confusion is likely because the Rhino-Rack Rooftop Cargo Bag # RRLB200 is designed to be used on a roof platform or roof basket which would be rigid. It is not designed to be used as a stand alone product with just crossbars or nothing on the roof. view full answer...
The Advantage SportsRack cargo bag # HE3021 is made out of a Heavy-duty, vinyl-coated, 600-denier polyester. This keeps it from ripping easily and helping to keep water out. view full answer...
For the 2021 Jeep Wrangler Unlimited hard top, the correct kit is Rhino Rack Vortex Aero Aluminum Cross Bars - Black - 59" Long # RRVA150B-2 with Leg Adapters # RRVA-FK1-2 and Feet # RRRL110S5-2. The towers are made out of plastic and are very durable; I have not seen any complaints about the towers breaking; a lot of roof racks use plastic towers.
Keep in mind, this system is rated for 88lbs on your Jeep so you do not want to exceed that amount. I attached a helpful demonstration video... view full answer...
The black square portion of the Mounting Adapters for Surco Safari Rack 5.0 Rooftop Cargo Basket # SPY400 is metal. If it was plastic it wouldn't really be strong enough to do it's job very well. view full answer...
I recommend taking a look at the Malone TradeSport Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs # MAL55VR. This is a very affordable setup that clamps onto the bed rails of your 2018 Nissan Frontier, as long as it is crew cab 5 or 6 foot bed without utili-track system, or if it is king cab 6 foot bed without utili-track system.
T-slot channels are integrated into the crossbars of this ladder rack, making it very easy to install a wide array of accessories like kayak carriers... view full answer...
I spoke with Inno Racks about the Inno Wedge 660 Rooftop Cargo Box part # INBRM660WH and they informed me that the claws which secure the box to the crossbar are made of metal with a rubber coated sleeve. I have attached a photo below to help clarify. view full answer...
The Kuat Grip Ski and Snowboard Carrier part # GRR6B is made overseas but don't let that steer you away from this carrier as it's one of the best options on the market for skis/snowboards. It's also backed by a lifetime warranty so if you ever do run into any issues with manufacturing, you'd be covered. The Kuat Grip Ski is unique in that you can slide the rack out for easier loading. It also has locks for security.
If you're looking for a USA made carrier, the only option we have for... view full answer...
The Thule SnowPack Extender Ski and Snowboard Carrier part # TH7325 is made overseas but don't let that steer you away from this carrier as it's a great option for skis/snowboards. It's also backed by a lifetime warranty so if you ever do run into any issues with manufacturing, you'd be covered. The Thule SnowPack is easy to use and it has locks for security. If you're looking for a USA made carrier, the ONLY OPTION we have for this is the SeaSucker Ski and Snowboard Carrier part # SEA46ZR... view full answer...
The Replacement Self-Adhesive M5 Washer for Thule 54" Top Track System # 853-5367 is a nylon washer.
This is a replacement part for the Thule Roof Mounted Top Rack System - 54" Long # THTP54. view full answer...
I would not recommend trying to fashion the Yakima Landing Pads 24, part # Y74FR, out of aluminum yourself. These fit kits have to be very precise, and trying to make one for yourself will definitely void any kind of warranty on the towers and crossbars.
As for the strength, Yakima has been doing quite well over the years with improving the quality of their products, so you can rest assured that the material of the Landing Pads 24 is strong enough to handle the 165-pound limit of the crossbars.... view full answer...
Go To Results